Tag Archives: electronics

More on Waterproofing Your Electronics with Corrosion X – Video on Sealing Up DF95 Electrics ….!!

New member, Andrew G, has pointed me to this great and useful DF95 video about waterproofing your onboard receiver and other onboard electronics using “Corrosion X”

One of the notable things to me is that they are using a pointed 1oz dropper bottle to dispense the fluid. It looks like in North America 1oz dropper bottles of Corrosion X are easily available. At the time of writing, in UK I haven’t found this product packaging. The same company are doing a fishing reel lube called SpeedX in a 1oz dropper bottle, but that seems to be it.

I’d rather have some small amount of Corrosion X in the boat tool box and with me all the time. I find through past experience that if the cap comes off those dropper bottles it will leak everywhere. Instead, I am going to try one of these (very cheap on Amazon)

It has quite a pointy end on the pipette which I thought might be better for this particular job, than the ones with olive oil to stick in your ear! And once that lid is screwed in, I reckon you are going to be safe against leaks in transit. The bottle size I chose is 50ml… so about 3 tablespoons – that should easily be enough for radio sailing.

What’s In Your Toolbox? For Water in the Electrics…

If you get a boat a little bit damp inside, then at some time you’ll likely get erratic electrics. It’s a general radio sailing challenge of course, not just Marbleheads. If you’re new to this radio sailing sport then you’ll be wondering what can be done about it.

Not being funny, …but since I started racing a loan boat this year, the owner thrust a jar of vaseline into my hand and said that I should always smear a little of the grease around the thread of the pot-lid. I’ve done it religiously before each race session and I must admit, his boat sails bone dry every day.

What if water ingress is not through the pot-lid? A Datchet member revealed that he uses a water repellent spray called “Corrosion X” on the electric terminals and absolutely swears by its effectiveness.

You can read all about Corrosion X by clicking on the link below. Interesting – I suspect I’ll just have to get a small can to try out and keep in the tool box.