Tag Archives: datchet radio sailing

Drying Out the Inside of Your Boat After Sailing

After a pretty wet day’s sailing, I pulled the bung off the F6 Marblehead and let the water out, as you do. This prompted a couple of discussions with Clubmates, LT and GH. It seems that when they get home, they pump dry air through their boats to keep the electrics dry. Good thinking.

As an aside, my IOM has a massive wide pot aperture, so I thinking airing the hull and electric is less of an issue with that. You can almost put your hand in, it’s that big. If you have a 60mm pot in your IOM, you might think about this though.

We had a great discussion in the bar about whether it is best to push dry air in, or pull damp air out. I decided on the latter for me.

Prompted by LH, I ordered the bits from Amazon : 40mm USB powered computer fan with 3 speed switch, a hygrometer to measure progress, (total less than £20 I think) and for my spare room, a 2m USB extension cable. The pot in the F6 is the ubiquitous Sailsetc 60mm pot, so I ordered an extra pot and lid for £2.50 plus postage. Although you can get a pot lid separately and save £1, I reckon you need the whole thing so that when you drill a hole in the lid to suck the air out, you can hold the whole affair by the pot as you drill.

This is what it looks like with the fan in situ. Note I have glued it on the lid for now, but I suspect in the longer term I’ll bolt it on using M3 bolts. There is a 3 speed switch on the fan and in initial tests I ran it on the lower speed. You need the bung out obviously so that dry air gets in to displace the damp air coming out. The hole in the lid exactly matches the fan diameter.

LT also suggested a hygrometer to place in the airflow to monitor progress. Amazingly it costs about the same as London coffee.

This is what it looks like, when it’s running. Fingers crossed it works fine.

This was the fan we used from amazon:-

ELUTENG Mini 40mm 5V USB Fan Desk PC Fans with L/M/H 3 Adjustable Speed Portable USB Computer Fan USB Case Box Electronic Cooling Fan 5300 RPM with Metal Grill for Laptop/TV Box/AV Cabinet/PS4/Router

This was the hygrometer:-

Goabroa Mini Hygrometer Thermometer Digital Indoor Humidity Gauge Monitor with Temperature Meter Sensor Fahrenheit (℉)

Race Report – 4th and 5th November 2023

The Weekend’s results:-

Four Tens were out on Saturday with a delayed start due to rain/drizzle and an uncooperative wind, we eventually got going on the South Course and did four races before a lunch break.  Two of us changed down at this point and this proved disastrous for Phil, who had stayed in top rig, as he nose dived big time at the last spreader of the last race to let myself through to win the day by one point.  Full results were 
Hugh 8 pts
Phil 9 pts
Richard U 15 pts
Graham 20 pts

Sunday :-

We had 4 skippers for IOMs however two did not have no. 3 Rigs, or it C rigs these days and Les and myself thought it would not be much fun with two and anyway Les does not like waves!  

In fairness it was West 15 gusting 23 knots 

Racing Report – Marbleheads, Sunday 29th October 2023

Despite the rain, Datchet members had a very lively weekend. The home fleet fielded seven of its Marbleheads and some great racing was had with Rohan Williams winning the day.  Three of our members travelled to the final 2023 One Metre Ranking event at Woodspring.  In an extremely competitive fleet of 36, the Datchet team put up a really great show. Datchet’s Craig Richards won third place with his 3D printed One Metre… and winning chocolate biscuits!

Looking forward to even more than Craig’s biscuits, it looks like we might have up to four new members by year end.  Next week we race our One Metres.  It’ll be close racing as always !